PRODUCTS CENTER
cape verde Woven Geotextile
Category:
Product Description
Woven Geotextile: It is made of high-strength industrial synthetic fibers and produced by weaving process.
Specification: width: 2m-6m, roll length: 200m, or according to customers' requirements.
Product properties of filament woven geotextiles
1, high strength: the use of high-strength industrial polypropylene, polyester, nylon and other synthetic fibers as raw materials, with a high original strength. 2, after weaving into a regular interwoven structure, the comprehensive load-bearing capacity is further improved.
3, durability: synthetic chemical fiber is characterized by not easy to degenerate, decomposition, weathering. It can keep its original characteristics for a long time.
4, corrosion resistance: synthetic chemical fiber is generally acid-resistant, alkali resistance, insect resistance, mold resistance.
5, water permeability: woven fabrics can effectively control its structural pores to achieve a certain degree of water permeability.
6, convenient storage and transportation: due to the light weight, can be packaged according to certain requirements, so the transportation, storage, construction, etc. are very convenient -30 ℃ temperature changes and the quality is not affected
The quality of woven mold bag cloth is the quality of the single layer before sewing, woven mold bag cloth tensile strength for the non-containing tendons when the index. Mold bag final molding needs to be made according to the engineering design requirements, engineering units need to provide design drawings or sewing diagrams and related dimensions. The specifications of our products, technical indicators can also be customized according to user needs.
| Project Product Line | Unit | Allowable deviation | Woven geotextile molded bag fabric | ||
| 7XM-120-200 | ZXM250-500 | ZXM550 | |||
| Mass per unit of product (unit) | g/m2 | -3% | 240 | 280 | 380 |
| Tensile strength (longitudinal) | N/5cm | ≥ | 2500 | 3000 | 3800 |
| Elongation (longitudinal) | % | ≤ | 30 | 30 | 30 |
| Tensile strength (horizontal) | N/5cm | ≥ | 2300 | 2800 | 3100 |
| Elongation (horizontal) | % | ≤ | 28 | 28 | 28 |
| CBR Top Break Strength | N | ≥ | 4000 | 5000 | 6000 |
| Vertical Permeability Coefficient | cm/s | ≥ | 1.3×10-2 | 1.5×10-2 | 1.8×10-2 |
| Equivalent aperture 095 | mm | ≤ | 0.18 | 0.22 | 0.25 |
Note: 1.
1, the quality of woven mold bag cloth for the quality of a single layer before sewing, woven mold bag cloth tensile strength for the time of the indicator does not contain tendons.
2、The final molding of the bag should be made according to the engineering design requirements, and the engineering unit should provide the design drawing or sewing diagram and the relevant dimensions.
3, the factory product specifications, technical indicators can also be customized according to user needs.